Vestakeep Peek Polyether ether Ketone

Polyether ether Ketone
manufacture：EVONIK

Polyether ether Ketone

Vestakeep Peek
Polyether ether Ketone

Manufacture：EVONIK

High temperature resistance：200°C pure resin ~300°C (fibering specification), long-term use temperature of 260°C
Chemical resistance：excellent chemical resistance to nitric acid, acetic acid, methylacetone, sulfuric acid and formic acid
The electrical properties can remain almost unchanged under different frequency and temperature changes
Flame retardancy：1.45mm V-0 can be achieved without the addition of fire retardants
Excellent hydrolytic stability： can resist high-pressure vapor and water
Excellent sliding friction properties, extremely resistant to wear
Low moisture absorption and excellent dimensional stability
Excellent high temperature mechanical properties

Drying temperature：150~160°C 3~4hr

Injection temperature：360~400°C

Molding temperature：180~210°C

Item	Viscosity	filler	Charateristic
Name	Viscosity	filler	Charateristic
1000G	Low viscosity, high flow	only raw	Basic specifications for gears and other products, food utensils and equipment (FDA compliant)
2000G	Medium viscosity, injection grade	only raw
2000GF30		30% Glass Fiber	High rigidity component
2000CF30		30% Carbon Fiber	Wear-resistant parts, transmission gears and other parts
2000FC30		10% Graphite, 10% Carbon Fiber, 10% PTFE	Wear-resistant parts, transmission gears and other parts
3300G	Medium viscosity, extrusion grade	only raw	Wires and cables, filaments, films
L4000G	High viscosity injection and extrusion grade	only raw	Basic specifications for gears and other products, food utensils and equipment (FDA compliant)
CW4500G		only raw
4000GF30		30% Glass Fiber
4000CF30		30% Carbon Fiber	High rigidity, low bend, suitable for housing parts
4000FC30		10% Graphite, 10% Carbon Fiber, 10% PTFE	Wear-resistant parts, transmission gears and other parts
5000G	Supra high viscosity, extrusion grade	only raw	Gears, films, products with high mechanical loads
M20 G	Low viscosity, injection grade	only raw	1.Medical grade USP Class VI：USP Level VI ISO 10993-5: In vitro cytotoxicity ISO 10993-10: Allergic and irritating ISO 10993-11: Acute toxicity ISO 10993-6: Blood compatibility 2.Medical equipment, surgical machinery gears, other functional parts
M33 G-HP	Medium viscosity, injection and extrusion grade	only raw
M40 G	High viscosity, injection and extrusion grade	only raw