NYLON 66
Polyamide 66 / Compond
Manufacturer: Nanya Plastic Co., Ltd
South Asian FR-NYLON 66, like other NYLONs, has the characteristics of easy water absorption; The water absorption rate of NYLON 66 is less than that of NYLON 6, but it is still a superabsorbent material in engineering plastics. The company stands in the position of raw material suppliers, and provides experimental data for customer reference under relevant experimental equipment and certain conditions.
South Asia NYLON 66 Engineering Plastic Properties:
1.NYLON 66 absorbs less water than NYLON 6
◆Water absorption
South Asia FR-NYLON 66, like other NYLONs, has the property of easy water absorption; The water absorption rate of NYLON 66 is less than that of NYLON 6, but it is still a superabsorbent material in engineering plastics. The saturated moisture content reference table is as follows: South Asia NYLON 66 Engineering Plastic Properties:
| Variety of Material | saturated water capacity | |
|---|---|---|
| 20°C 50% Relative humidity | 20°C 100% Relative humidity | |
| PA6 General grade | 2.5~3.0% | 9.0~11% |
| PA 66 General grade | 2.3~2.8% | 8.0~10% |
| PA6 fiber 30% | 1.6~2.0% | 6.0~8.0% |
| PA66 fiber 30% | 1.4~1.7% | 5.0~6.0% |
|
test materials：
South Aisa PA6-2210
South Aisa PA6-2210G6(with fiber 30%)
South Aisa PA66-6110
South Aisa PA66-6210G6(with fiber 30%)
|
||
2. Excellent toughness resistance and impact resistance
Normal grade impact resistance ( notched ASTM:D256): 5.5KG.cm/cm
Super tough grade size impact resistant ( notched ASTM:D256): 110KG.cm/cm
3. High tensile strength
PLUS 33% GLASS FIBER TENSILE STRENGTH (ASTM:D638): 2000KG/cm3
General Tensile Strength (ASTM:D638): 820KG/cm3
4. Chemical resistance: nylon backbone amino group is polar group, so nylon is resistant to gasoline, lubricating oil, ketone, ester, aldehydes and other properties, but nylon is easily eroded by alcohols, phenols, strong acids and other chemicals.
5. Self-lubricating: nylon has self-lubricity, so it has good wear resistance and is suitable for gear products.
6. Good fire resistance: nylon UL94 V-2 characteristics, adding fire retardant up to UL V-0 grade.
Dry：80°C 3~4hr
Injection temperature：265~295°C
Mold temperature：70~110°C
| Item | g/cm3 | Mold Shrinkage Percentage(%) | Thermal Deformation Temperature 1.82MPa |
Flame resistance UL 94 |
Characteristic | |
|---|---|---|---|---|---|---|
| Name | Flow | Vertical | ||||
| 6110G | 1.14 | 1.6 | 1.7 | 66°C | V-2 | Nelon 66 injection grade |
| 6512E | 1.05 | 1.2 | 1.5 | 60°C | HB | supra high toughness low temperature resistance |
| 6310G | 1.15 | 0.8 | 1.15 | 75°C | V-0 | Fireproof flame resistance non-halogen |
| 6410G5 | 1.4 | 0.3 | 1.2 | 248°C | V-0 | 25%GF，fireproof V-0 class |
| 6210G3 | 1.22 | 0.3 | 1.0 | 245°C | HB | 15%GF |
| 6210GC | 1.35 | 0.3 | 0.85 | 238°C | HB | 33%GF |
| 6210G9 | 1.46 | 0.2 | 0.4 | 240°C | HB | 45%GF |
| 6212G3 | 1.22 | 0.15 | 1.1 | 235°C | HB | Supra toughness grade +15%GF |
| 6212G6 | 1.32 | 0.3 | 0.6 | 220°C | HB | Supra toughness grade +30%GF |
| 6410G3 | 1.37 | 0.4 | 1.1 | 235°C | V-0 | 15%GF, thickness 1/32" fireproof V-0 class, F1 certified |
| 6410G5 | 1.6 | 0.4 | 0.8 | 238°C | V-0 | 25%GF, thickness 1/32" fireproof V-0 class, weather resistance F1 certified |
| 6401G6F | 1.6 | 0.4 | 0.7 | 230°C | V-0 | 330%GF, thickness 1/8" fireproof V-0 class |
| 640PG3A | 1.29 | 0.5 | 1.0 | 240°C | V-0 | 15%GF, thickness 1/32" fireproof V-0 class, non-halogen F1 certified |
| 640PG5A | 1.38 | 0.3 | 0.6 | 245°C | V-0 | 25%GF, thickness 1/32" fireproof V-0 class, non-halogen F1 certified |
| 640PG6A | 1.4 | 0.3 | 0.8 | 245°C | V-0 | 30%GF, thickness 1/32" fireproof V-0 class, non-halogen F1 certified |
No. 5, Dinghu 5th St., Guishan Dist., Taoyuan City 333008 , Taiwan (R.O.C.)
TEL:(03)328-0018.327-1978
FAX:(03)327-1859.328-1860
No. 51, Gongyequ 21st Rd., Nantun Dist., Taichung City 408017 , Taiwan (R.O.C.)
TEL:(04)2359-0821.2359-2028
FAX:(04)2359-0880
No. 181, Zhougong St., Yongkang Dist., Tainan City 710004 , Taiwan (R.O.C.)
TEL:(06)253-9988
FAX:(06)254-1141